Description
Description:
- OVEM20HBQOCENLK
- Vacuum Generator Chassis Mount
- (539074)
- Nominal Width Of Laval Nozzle: 0.45 Mm ... 3 Mm
- Width Dimension: 20 Mm ... 36 Mm
- Muffler Construction Type: Open
- Mounting Position: Any
- Ejector Characteristics: High Suction Rate High Vacuum Standard
- Grade Of Filtration: 40 Μm
- Manual Override: Non-Detenting Additionally Via Operating Buttons
- Integrated Function: Ejector Pulse Valve, Electric Flow Control Shut Off Valve, Electric Compressed Air Filter Air Saving Function, Electrical Non-return Valve Pneumatic Muffler Open Vacuum Switch
- Structural Design: Modular
- Short-circuit Protection: Yes
- Measured Variable: Relative Pressure
- Measuring Principle: Piezoresistive
- Switching Element Function: N/C Contact N/O Contact
- Switching Function: Window Comparator Threshold Value Comparator Threshold Value With Fixed Hysteresis
- Valve Function: Closed Open
- Reverse Polarity Protection: For All Electrical Connections
- Switching Input To Standard: Iec 61131-2
- Display Type: 4-Character Alphanumeric Back-Lit Lcd Led
- Display Range: 0.999 Bar ... 0 Bar
- Display Range: 29.5 Inchhg ... 0 Inchhg
- Displayable Unit(S): Bar Inh2o Inhg
- Setting Range Hysteresis: 0.9 Bar ... 0 Bar
- Setting Options: IO-link® Teach-In Via Display And Pushbuttons
- Switching Position Indication: Lcd Led
- Switching Status Indication: Optical
- Setting Range Threshold Value: 1 Bar ... 0 Bar
- Operating Pressure: 2 Bar ... 8 Bar
- Operating Pressure For Max. Vacuum: 3.5 Bar ... 5.3 Bar
- Max. Vacuum: 93 %
- Nominal Operating Pressure: 6 Bar
- Max. Suction Rate With Respect To Atmosphere: 6 L/min ... 348 L/min
- Air Supply Time At Nominal Operating Pressure: 0.2 S ... 4.8 S
- Dc Operating Voltage Range: 20.4 V ... 27.6 V
- Duty Cycle: 100%
- Inductive Protective Circuit: Adapted To Mz, My And Me Coils
- Insulation Voltage: 50 V
- Idle Current: <80 Ma
- Max. Output Current: 100 Ma
- Residual Current: 0.1 Ma
- Switching Output: 2xnpn 2xpnp Npn Pnp
- Voltage Drop: ≤2 V
- Coil Characteristics: 24 V Dc: Low-Current Phase 0.3 W, High-Current Phase 2.55 W
- Surge Resistance: 0.8 Kv
- Overload Protection: Available
- Contamination Level: 3
- Certification: Rcm Compliance Mark C Ul Us - Listed (Ol)
- Kc Characters: Kc Emc
- Ce Marking (See Declaration Of Conformity): As Per Eu Emc Directive
- Ukca Marking (See Declaration Of Conformity): To Uk Instructions For Emc
- Operating Medium: Compressed Air As Per Iso 8573-1:2010 [7:4:4]
- Information On Operating And Pilot Media: Operation With Oil Lubrication Not Possible
- Corrosion Resistance Class (Crc): 2 - Moderate Corrosion Stress
- Labs (Pwis) Conformity: VDMA24364-B2-L VDMA24364 Zone III
- Temperature Of Medium: 0 °C ... 50 °C
- Relative Air Humidity: 5 - 85 %
- Noise Level At Nominal Operating Pressure: 45 Db(A) ... 77 Db(A)
- Degree Of Protection: Ip65
- Protection Class: III
- Ambient Temperature: 0 °C ... 50 °C
- Max. Tightening Torque: 0.8 Nm With Internal Thread 2.5 Nm With Through-Hole
- Product Weight: 285 G ... 885 G
- Pressure Measuring Range: 1 Bar ... 0 Bar
- Accuracy In ± % Fs: 0.5 %fs ... 3 %FS
- Hysteresis: 0.02 Bar
- Reproducibility, Switching Value Fs: 0.6 %
- Protocol: IO-Link®
- IO-Link®, Protocol Version: Device V 1.1
- IO-Link®, Profile: Smart Sensor Profile
- IO-Link®, Function Classes: Binary Data Channel (Bdc) Process Data Variable (Pdv) Identification Diagnostics Teach Channel
- IO-Link®, Communication Mode: Com2 (38,4 Kbd)
- IO-Link®, Port Class: A
- IO-Link®, Process Data Width Out: 1 Byte
- IO-Link®, Process Data Content Out: 1 Bit (Ejector Pulse On/Off) 1 Bit (Vacuum On/Off)
- IO-Link®, Process Data Width In: 2 Byte
- IO-Link®, Process Data Content In: 14 Bit Pdv (Pressure Measurement) 2 Bit Bdc (Pressure Monitoring)
- IO-Link®, Minimum Cycle Time: 3.5 Ms
- IO-Link®, Data Memory Required: 500 Byte
- IO-Link®, Device Id: 0x00003E
- Input Switching Logic: Npn (Negative Switching) Pnp (Positive Switching)
- Electrical Connection: 5-Pin M12x1 Plug
- Protection Against Tampering: Pin Code Electronic Interlock
- Type Of Mounting: With Through-Hole With Internal Thread With Accessories
- Pneumatic Connection 1: G1/8 G1/4 1/8 Npt 1/4 Npt Qs-6 Qs-8 Qs-1/4 Qs-5/16
- Pneumatic Connection 3: G1/8 G3/8 1/8 Npt 1/4 Npt Qs-8 Qs-12 Qs-16 Qs-5/16 Pneumatic Muffler Pneumatic Muffler Integrated
- Vacuum Connection: G1/8 G1/4 1/8 Npt 1/4 Npt 1/2 Npt Qs-6 Qs-8 Qs-12 Qs-16 Qs-1/4 Qs-5/16
- Note On Materials: Rohs-Compliant
- Seals Material: Hnbr Nbr
- Female Nozzle Material: Pom
- Compressed Air Filter Material: Fabric Pa Sintered Steel
- Material Of Filter Housing: Pa-Reinforced
- Housing Material: Die-Cast Aluminum Wrought Aluminum Alloy Pa-Reinforced
- Hollow Bolt Material: Wrought Aluminum Alloy
- Material Of Adjusting Screw: Steel
- Muffler Material: Wrought Aluminum Alloy Pom Pu Foam
- Material Of Screws: Steel
- Inspection Window Material: Pa
- Material Of Plug Housing: Brass, Nickel-plated
- Material Of Pin Contacts: Brass, Gold-plated
- Material Of Pins: Steel
- Material Of Jet Nozzle: Wrought Aluminum Alloy
- Material Of Keypad: Pa-Reinforced Tpe-U
- Material Of Pneumatic Fitting: Wrought Aluminum Alloy, Anodized Brass, Nickel-Plated
- Bracket Material: Stainless Steel